Gambit Communications® Network Simulation

Gambit Communications® is a provider of tools for simulating servers, networking and storage devices.

Network management software

MIMIC Simulator for testing your network management software.

Network Management Apps

MIMIC Simulator for testing your network management software. SNMP Simulation.

MIMIC Web Simulator

Create a large virtual lab with Gambit Communications.

IOS Simulator

IOS based apps Using MIMIC Simulator.

Tuesday, 31 January 2017

Fault Administration via SNMP Traps Over IPv6

Characteristically network management and monitoring software was engineered in the 1990s, and computer programmers employed older languages and broadcast technologies, similar to the ever-present internet protocol edition 4, or IPv4. A number of of this software was employed by big company to detect liability by cut off information in SNMP Traps sent from a diversity of system hosts.


These error administration resolutions were typically obtain by big IT administration software vendors in the late 1990s throughout 2005, in an effort to balance their bequest artifact offerings. The network simulator is the mostly used things these days.

The preeminent IT supervising tools are those that can carry out a diversity of purpose and fault administration, but they should be prepared for next generation system and services. That is the key part that numerous of the bequest structure providers cannot provide mobility and easiness of use, particularly with respect to adding up serious latest functionality to support latest services.

And these days there are fresh tests with respect to organizing networks, comprising safety and the address room detonation caused by the pure number of latest equipment and services that are being carried online. The IPv6 protocol has been intended to have a much superior address room than IPv4, permits suppleness in routing internet traffic and assigning addresses, and get rid of the requirement to employ system address conversion or NAT to keep away from address exhaustion.


Traps are produced from appliances, servers, devices or applications in the IT communications which have distorted. The alteration can be as little as a user logging off of a server or as radical as a router or application deteriorating.

If latest plans are IPv6 allowed and sending SNMPv3 protected traps, the error administrator had enhanced be capable to extent to being capable to manage vast amounts of traffic and big quantities of encrypted SNMP Traps over the IPv6 protocol.

Unluckily, the old bequest products cannot simply be retrofitted to support receiving of proceedings and traps over these latest protocols similar to SNMPv3 and IPv6. As of these latest challenges and the require to maintain those cutting edge protocols, latest software resolution are currently required.

Friday, 27 January 2017

Analyse Network Connection & Protocol With Network Simulator Integration

IT is a complex field of business with constant requirement for network & server simulation solutions. Many companies provide a comprehensive tool that helps in simulating servers, networking and acts as storage device. It is important to simulate servers and network for efficient lab testing and imparting high level of security against threats. With help of network simulation, real time testing becomes easy as it predicts the operation of the computer network.

Need for Simulator for IoT

With the help of the IoT Simulator thousands of IoT sensors, gateways and connected device undergo real world lab test. Generally, for covering all the protocols required by the IoT applications suite of simulators is required. There are many applications of the simulator which is why it is widely used across many IT firms.
• It helps in testing the scalability by comparing thousands of sensors, thus quick development and testing facilitated.

• With these simulators, marketing can be enhanced with powerful live show set ups.
• The sales can be pushed to individual or customer centric environment using the simulator suite.
• The simulator can create a smart city or smart factory with implementation of real time testing.


Connecting thousands of device in network

With network simulation it is possible to connect multiple devices and route them to a single network. With the IOS Simulator, it is possible to simulate over 100,000 devices to a single workstation. The devices can be distributed to multiple workstations with the simulation. Most of them are supported and certified by Cisco IOS software. Connecting the devices through the simulator enables testing of hundreds of applications. The simulator comprises of a complete suite that enables simulation of complete network, capture snapshots to figure out the behaviour of devices on network, manipulation of simulations, create network topology etc.

Simulation is necessary

In computer networking or IT fields, simulation is an important aspect in order to understand the behaviour of the network through the connected devices and help run real time tests. The network behaviour, associated applications and services thus can be observed in a test tab and thus any changes required can be modified in the lab in a controlled and efficient manner. Simulators help in decoding the network model describing the network connections like nodes, routers, switches etc and events including data transmissions. Various applications of network simulators are as given below.

• Understanding the topology of the network with precise information of network nodes and links between them.
• Test and find the flow of application between nodes.
• It is affordable way to analyse the network and works great with enterprise, data centres, companies etc.
• It helps in evaluation of protocol and design network with faults through real time testing.


It is an integral part of any enterprise or business that has network of devices connected in order to resolve issues related to the connection and network. With the simulators, lab testing can be done in order to progress the current set-up. It is an efficient way to keep a check on the complete protocol of network set-up.

Friday, 6 January 2017

Simulating a Network of Endless Workstations and Interacting With Each Other

Let your imagination fly in the world of things! Let us become free from the practical constraints of the IOT development! Let us create the things and behavior just like the real one! Let us know what IoT and Cisco IOS simulators are! Let us understand how it can help in communicating the unique patterns!

IoT( Internet of Things) Simulators

Iot simulator simulates the sensor, actuators and devices with unique behavior. It helps to communicate in unique patterns. It helps the simulated things interact with each other thereby creating complex, dynamic system. Overall it helps creating the exogenous events for the system. With this simulator it is possible to make the world live with different environmental factors like weather breakdowns, traffic jam, etc.


The IoT (Internet of things) simulator helps creating a real-world test lab with thousands of IoT sensors and devices. There are many common uses of the Internet of Things simulator.! Let us talk about the versatile suite of the Internet of Things software tools!

Development and Testing

The Internet of things simulator helps the IoT developers to implement their products as quickly as possible. It helps in testing of scalability against the thousands of the sensors, MQTT brokers and MQTT subscribers.


It becomes easier to evaluate the suitability of the applications once various heterogeneous environments of sensors and devices is ready. It also helps evaluating the anticipated failure and growth sensors.

Trade Shows and Sales Demo

With the help of IoT simulators, it is very easy to have a powerful marketing setup. It helps in setting up for the live demonstration at the trade shows. It also helps the sales to tailor their presentations to the individual customer’s environment.

So, if you are interested in creating your own test lab nestled with devices and topology, it is ideal to go for simulators that can allows you to create different devices. It is possible to simulate as many as one lakh devices in a lab.


About IOS Simulators

Let us talk about what the IOS simulators are? How it can be helpful and make the businesses to improve?
Designed mainly for testing and training for network device configuration, the Cisco IOS simulators also helps in variety of ways:

• The IOS Simulators enable simulating variety of Cisco devices.
• It helps simulating the 100,000 devices in single workstations.
• It also benefits simulating number of devices over multiple workstations.
• It makes it easier to test various device configurations and issues.
• Some simulation software also let you create a new device that you want to simulate.
• It helps to see how networking applications run against various devices.

Overall, IOS simulators are the ultimate solutions available for testing and training of Cisco devices.It is really a wonderful thing that allows debugging facility which is really an important bench mark.

In short, the IOS simulators and IoT simulators helps test scalability, features and variety of network conditions.

Wednesday, 4 January 2017

Best Network and Server Simulation Services

Network Simulation is a technique using which developers can model the nature of a network and interactions between different network entities. This simulation is performed with the help of a Network Simulator. Network simulator software helps in the analysis of complex networks that cannot be understood using traditional analytical methods. If you are looking for the perfect network simulator, then the MIMIC Simulator Suite developed by Gambit Communications is what you need. It is the one stop shop for all your simulation needs.

Network Simulator

Gambit Communications specializes in the development of network, server and storage simulation tools. These tools are designed to enhance productivity and reduce development time and cost. Launched in 1997, the MIMIC Simulator Suite is the flagship product of the firm. The simulator can be configured according to different internet protocols like SNMP, Web (REST/SOAP), Telnet/SSH, NetFlow, IPMI/RedFish etc. The simulator can be customized according to the customer’s demands. Over the years, Gambit Communications has provided its services to numerous MNC’s and international brands.

The MIMIC Simulator Suite consists of the following simulators:

1. SNMP Simulator.

2. NetFlow Simulator.

3. sFlow Simulator.

4. Web Simulator.

5. IoT Simulator.

6. MQTT Simulator.

7. IOS Simulator.

8. JUNOS Simulator.

9. Server Simulator.

10. Wireless Simulator.

11. Redfish Simulator.

12. IPMI Simulator.

13. Cable Modem Simulator.

With the help of the Simple Network Management Protocol (SNMP) Simulator of the MIMIC Simulator you can create a network of up to 10000 devices. The application lets create a variety of device configurations. The device can have any number of public or private MIBs. The user can also generate SNMP Traps to simulate disaster scenarios.

SNMP Traps

The SNMP Simulator mimics actual devices. Each device has its ownIPv6 address, independent SNMPv1 strings and uptime notion. The devices can be configured at run-time. The user can choose either an individual configuration or a collective configuration. The MIMIC Discovery Wizard lets you record your production tests and simulate them. The MIMIC MIB Wizard helps you compile multiple SNMP MIBs in any order.

Some features of the MIMIC SNMP Simulator are briefly described below:

Multiple Devices in One Unit: Users can simulate up to 100,000 devices, each with an individual IP address, function and uptime notion.

Customized Simulation: Users can select from a wide range of pre-compiled MIBs and build any network simulation.

Device Configuration: Users can choose to configure the devices individually or collectively.
Extensible Environment: MIBs can be added to the simulation by compiling it with MIMIC MIB Wizard.
Real Time Modifiable Solutions: Simulations can be paused, inspected for errors and resumed. The MIB Browser helps you manipulate each device individually.

Configurable Trap Generation using Trap Wizard

Gambit Communications has also developed a MIMIC Virtual Lab to improve network management in enterprises.The virtual labs developed by Gambit Communications are Enterprise Lab,CCNA Lab, Cloud-Online Lab and BSCI Lab. The firm has also developed an iCCNALab for iPhone users. In addition to network simulation and management tools, the firm also offers training courses. These courses cover Set-up,installation, introduction and advanced operations with the MIMIC Simulator Suite.

Tuesday, 3 January 2017

Check Server Health Using SNMP - In Search Of the Preeminent Tools

Server checking is vital to IT infrastructural preservation. An excellent checking organization not simply makes alarm in reply to the dangerous proceedings but further more offers the logical apparatus to work on the better situation in IT domain. For server checking purposes, a number of normal protocols are employed in the IT industry. The usually employed protocols are SNMP, ICMP etc. SNMP is, by far, the commonest selection and extensively used stage for server checking. SNMP employs an ordinary group of people string to check devices. While the string is coordinated, it offers helpful information concerning the physical health of server and additional devices.


SNMP stands for Simple Network Management Protocol. It is a customary protocol and employed to check servers on IP system. Though, the service of SNMP Test expands to further devices comprising routers, switches, printers etc. This protocol has a wide spread utilization in network administration systems. SNMP checks every of the network friendly devices for circumstances worth which deserve attention from the superintendent.

Primarily, it lets us make a decision on what to administer. Lets us declare a router or a switch or a computer for instance, we require having a number of software or some what inside that will talk our language and will perform what it is inquired to perform. If he starts considering multifaceted language, in that case it turns out to be hard. So we educate the manager merely three SNMP commands. And we have the administrator who will concern a number of of these commands and further more recognize some what the agent sends. This is the etiquette we consent between the mediator and the manager. It is termed SNMP and it is as easy as what we have just interpreted.

At the present, what is all the stuff you would like to perform on a router? Let us attempt to categorize them. You would like to obtain the position of the router, obtain a number of significant constraints on the router and obtain the present actions on the router. A verb which is wide spread in all of these everyday jobs which we are setting up to carry out is the word obtain. This is the initial categorization. So SNMP supports a command named the GET request. Currently formerly you choose that you have to perform a get, certainly you will further more recognize earlier what is that you would like to acquire. Do you would like to obtain the position, the constraint or the actions? These terms and the farm duties would be diverse for each and every appliance. So how do we resolve this difficulty? We could employ a string and declare that we would like to obtain this string. Or we could perform it based on a number of identifier and recognize each of the constituent which we are fascinated in exclusively.


In SNMP part (frequently called an SNMP agent) is set up in every of these network essentials. Every SNMP agent has dissimilar odd jobs, but what they all essentially perform is offering feedback information on every network part to the major system.

The information that is practice dcomprises relaying particulars regarding obtainable structure resources, programs running, etc. All of these are communicated by manner of SNMP to the system or organization in charge.